Manufactures of Fibreglass Roofing Products since 1983

Home Page

About Us

Fibreglass Products

Polycarbonate Products

Smartlite Roof Sheet PDF
Smartlite Multiwall PDF
Gallina Polycarb. Products

Roof Ventilators

Roofing Accessories

Sump Jet roof drainage

Profiles

Installation details

Safety Data

New Products

Distributors

Contact Us

 

 

 

Topglass 50 FR Plus

Fire Retardant Translucent Roofing

 

Introduction

Topglass 50 FR Plus is a Fire and Smoke retardant Natural Lighting System for use in Commercial and Industrial Buildings incorporating either a standard or a more advanced fire and smoke retardant resin system. Topglass 50 FR Plus will ultimately alter the flammability point of the sheeting, slow the spread of flame and reduce the amount of smoke thereby providing safer egress in the case of fire.


 

Key Benefits

  • Topglass 50 FR Plus is a glass reinforced polyester fire retardant sheeting that has been specifically formulated using fire retardant materials for use in commercial building applications and educational institutions to slow the spread of flames and to reduce the level of smoke;
  • The sheeting allows the transmittance of natural light into the interior of the structure while providing a fire retardance at minimal additional cost;
  • Topglass 50 FR Plus can be specified for any industrial and commercial building that requires compliance to provide safer egress from a building in the event of fire.

 

Applications

  • Schools and educational institutions;
  • Public assembly areas;
  • Combustible areas with high fire risk;
  • Where egress from a building in the event of fire may be restrictive.

 

Special Applications

AWTA Test report No. 7-487161-Co contained in this brochure refers to the minimum grade of fire retardant manufactured. Contact FGW Corporation for advice on more advanced fire and smoke retardant resin systems

 

Span Capacity Chart

 

Spanning Capacity Eco-Lite 10 and Topglass Grades

 

                                   Sheet Weight g/m2                   

   Recommended number of fasteners

 

2400

3050

3660

4270

4880

                Roof

                Wall

Profile

                                 Purlin Spacings                      

Mid Span

End Span

Mid Span

End Span

Corrugated

1200

1500

1700

 

 

4

6

6

6

Trimdek

1500

1700

2000

2300

 

5

5

5

5

Spandek

1600

2000

2300

2600

2800

5

5

5

5

Longspan

1600

2000

2300

2600

2800

5

5

5

5

Kliplok 406

1400

1700

2000

2300

2600

3

3

3

3

Kliplok 700

1400

1700

2000

2300

2600

4

4

4

4

Speedek

1400

1700

2000

2300

2600

3

3

3

3

The above spans are recommended for wind loads up to 1 Kpa

 

 

 

 

Physical Properties Chart

Specific Gravity 1.45
Tensile strength 90 Mpa
Surface Hardness minimum 40 Barcol
Impact strength minimum 1.96 Mpa
Shear strength 90 Mpa
Modulus of Elasticity 5,500 Mpa
Thermal Expansion 2.0 x 105 cm/°C
Water Absorption 0.2% in 24 hrs at 26°C
Flexible strength 145 Mpa
Service temperatures -20 to 95°C
Available colours Opal, other colours available upon request (Min order qty)

 



Expansion Data Chart

Material Expansion Comparisons 0 - 40°C temperature variation
  Fibreglass Polycarbonate Steel Aluminium
Thermal
expansion
7.2mm 16.2mm 2.9mm 5.8mm
Thermal
coefficient
3x10-5cm/cm/°C 6.75x10-5cm/cm/°C 1.2x10-5cm/cm/°C 2.4x10-5cm/cm/°C





Weights Chart

Series Weight Kg/M2
2400 2.4
3050 3.05
3660 3.66
4270 4.27
4880 4.88

 

 


 

Surface Coatings

Topglass 50 FR Plus is supplied with a superior weather surface film which has UV inbuilt inhibitors or our 100 micron Gel Coat surface offering improved serviceable life.
In specific applications and where minor corrosion may affect the underside of the sheeting, a Proprietary high sheen corrosion resistant surface can be supplied in place of the standard Polyester film.


 

Colours

The standard colour of Topglass 50 FR Plus is Neutral. Opalescent pigment can be incorporated where a heat and light transmission reduction is required.


 

Trafficability

Where trafficability is of concern contact FGW Corporation for specific technical support.


 

Specification

The fire retardant sheeting shall be Topglass 50 FR Plus as manufactured by FGW Corporation in accordance with AS/NZS 4256:3.1994.
The sheeting shall be manufactured to conform with the nominated roofing and cladding profile in accordance with weight (g/m2) or thickness (mm) requirements. Installation shall be carried out in accordance with AS/NZS 1562:3.1996 in a workmanlike manner.


 

Profiles

Topglass 50 FR Plus is available ex stock in a limited number of roofing profiles. Refer to Technical Catalogue or contact FGW Corporation.


 

Warranty

Topglass 50 FR Plus is supported by a comprehensive surface warranty. Refer to the FGW Corporation Technical Catalogue for warranty details, or contact FGW Corporation.



Download Installation Instructions

Download Topglass 50 FR Plus Test Report

Download Topglass 50 FR Plus brochure

Download Topglass 50 FR Plus Specifications

Design considerations

Profiles

Safety Data

    
Copyright © 2009 -2017 FGW Corporation Pty Ltd, 14 Reihill Road, Maddington, WA 6109